The EnviroAlert® EA800-ip (call for availiability) an on premise monitoring console, which is part of the Winland Critical-Environment Monitoring Solution.  When integrated into a security system, or used as a stand-alone solution, the EnviroAlert EA800-ip provides real-time monitoring and alerting of up to 12 zones impacting environment-dependent assets such as temperature, humidity, water, and gases. As part of the cloud-based solution, the EnviroAlert EA800-ip and all associated wired and wireless sensors can be managed remotely from INSIGHT. The EA800-ip requires a fee-based subscription to INSIGHT  if you want to receive email/text message alerts, reporting and the ability to configure online.

The EA800-ip may be used with or without INSIGHT and integrated in to any alarm panel via the relay outputs for each zone being monitored.

To learn more about INSIGHT and fees, please contact us at insightsupport@winland.com.


  • Monitor up to 12 sensors (up to 8 wireless, up to 4 wired)
  • Flexible application options through the use of wired and wireless sensors
  • Remote visibility and device management through web-based application
  • Monitoring capabilities include: temperature, humidity, water, gases, and pressure
  • Console accommodates 4-20mA sensors for additional application options
  • Dedicated output relays for each sensor
  • Seamless integration with any security system

Product Specifications

Low/High Limit Adjust Range Temperature: -112° to 302°F (-80° to 150°C) ±2°F
Humidity: 5% to 95% Relative Humidity ±5%
Range limitations are sensor-specific
Alarm Outputs 8 – Form C Relays (Configurable) – Max 30 VDC @ 1 Amp resistive
Auxiliary Alarm Output 1 – Form C Relay (Non-Configurable) – Max 30 VDC @ 1 Amp resistive
Wireless Frequency 2.405 GHz – 2.480 GHz, 16 channels
Data Collection Frequency (local) 30 seconds, 1, 5, 15, 30, 60, 120 minutes (default 5 minutes)
Real-Time Data Viewing (internet) Real-Time Data Viewing (internet) 5, 15, 30, 60, 120 minutes (default 5 minutes)
Data Collection Storage (local) 10,000 data points
1 minute = 1 week
120 minutes = 2 years
Power Requirements 11 to 26 VDC @ ≤500mA
Operating Temperature Range 32° to 122°F (0° to 50°C) Indoor Use Only
Ethernet 10/100BASE-TX/FX; fully compliant to IEEE802-3u standard
Piezo Buzzer 88 dBA (min) @10 cm Continuous (enable/disable for local audio alarm)
Transmission Distance 45’ to 100’ indoor (results may vary)
Console Dimensions 8.13 x 5.52 x 1.93” (20.6 x 14.0 x 4.9 cm)

EA800-ip Quick Start Guide           EA800-ip Manual          EA800-ip Spec Sheet                                                       
EnviroAlert Systems Planning Guide

Wireless Sensor Placement Guide                 
Wireless Sensor Test Results / Installation Guide

Web Monitoring Info- Please read before Install             
EnviroAlert Limit and Hysteresis Settings    

Rapid Configuration of Multiple EA800-ip Systems
EA800-ip Wiring Connections

Temperature System Validation                                     
White Papers 
Old Devlink Information

Prop 65 Notice for Californians

Download EA800-ip Sell Sheet

English Sell Sheet

Spanish Sell Sheet

Product Certifications
• CE

Check out our virtual trade show booth at  rxinsider logo Watch our INSIGHT video and see our EA800-ip overview onYOUTUBE LOGO