Mechanical
Temp alerts, MTA-1, TA-1, TA-2HL.
Q: Can these units be set normally
closed?
A: No, They are all Normally
open devices.
Q: Can I use these
units in freezers or coolers?
A: No, frost or moisture can
cause malfunction.
PS-110
Q: Is the three to eight minute
response time adjustable?
A: No, the response time is
determined by the ambient temp. Warmer temps = slower response.
Digital Temp Alerts -
UTA-1, TA-2HLD, TA-3 HLD.
Q: Can I extend the remote sensor
and what type of cable is recommended.
A: The remote sensor can be
extended up to 500 ft using a 22AWG (or larger) twisted pair
wire.
Q: Will the unit
hold it’s setting if power is lost.
A: Yes, all set points will
be saved in the unit.
Q: Can the unit
be calibrated/adjusted.
A: Yes, the offset programming
instruction are in the manuals.
WaterBug - WB-200, WB-800
Q: What is the cause if the
unit keeps going into false alarm.
A: If the sensor is placed on
a concrete floor this can cause false alarms. Also power loss
will cause a false alarm.
Q: How much water
does it take to trip the sensor.
A: You need enough water to
bridge across two of the metal contacts on the sensor.
Q: How far can
the sensor be from the module.
A: 100 feet per sensor, up to
six sensors.
VAL-1
Q: Can the sensor cable be extended
and what type of wire should be used.
A: The sensor can be extended
up to 2500 ft using a 22AWG shielded twisted pair with ground.
Direct burial cable is recommended.
Q: Will the VAL-1 sense people
or animals.
A: No, it will only detect moving
iron objects. LIGHTNING AND RADIO INTERFERENCE CAN CAUSE FALSE
ALARMS.
|