|
|
Temp Alerts®
For over 25 years Winland Electronics has manufactured environmental security products, providing "peace-of-mind" solutions to protect against unfavorable environmental conditions. The Temp Alert products provide reliable protection to monitor high and low temperature limits for residential or commercial property. The Temp Alert products can be integrated with any security system. Don't fall into the trap of only half protecting your property, specify Winland's security product solutions today! Contact us today for assistance with your "peace-of-mind" solution!
1-507-625-7231 or e-mail to: sales@winland.com.
NOTE: The Environmental Security Products are not available for purchase online, however, they are available through our extensive distribution network. Please refer to the distributor listing for the nearest location.
|
|
EnviroAlert (EA400-12)
[PN# M-001-0096]
Monitor four zones with any combination of a remote temperature, humidity or water sensing probe. If temperatures and humidity deviate from the preset limits or water forms a bridge between the contacts on the WaterBug® sensor the designated relay for each zone will activate an alarm, dialer, transmitter, etc.
|
EnviroAlert (EA200-12)
[PN# M-001-0095]
This advanced monitoring and alarm device provides precise monitoring of critical environments by utilizing an on-board temperature sensor or attaching any one of the remote temperature, humidity and water sensing probes. Receive dual zone coverage from simultaneous operation of the local and remote sensors. If either zone being monitored deviates from the preset limits, a relay output sends a signal to an appropriate warning system.
|
Mechanical Temp Alert (MTA-1)
[PN# M-001-0098]
The professional looking MTA-1 requires no power for operation. Simply set the separately adjustable high and low set points within 0 to 38° C range. If the monitored temperature rises above the high set point, a dry contact closure output is provided. If the monitored temperature falls below the low set point, a second dry contact closure output is provided.
|
Mechanical Fixed Temp Alert (TA-40)
[PN# M-001-0101]
The simple low-cost TA-40 requires no power for operation. A mechanically fixed set point allows normally closed contacts to open when the monitored temperature falls below the 4° C set point. This contact output is used to active external low current/voltage alarm
|
Mechanical Temp Alert (TA-2HL)
[PN# M-001-0100]
The economical TA-2HL requires no power for operation. Simply set the separately adjustable high and low set points within -34 to 54° C range. If the monitored temperature rises above the high set point, a dry contact closure output is provided. If the monitored temperature falls below the low set point, a second dry contact closure output is provided.
|
Mechanical Temp Alert (TA-1)
[PN# M-001-0099]
The economical TA-1 requires no power for operation. Simply set the separately adjustable high and low set points within -34 to 54° C range. If the monitored temperature rises above or falls below the set points, a dry contact closure output is provided.
|
|
|
* NOTE: For assistance in ordering our products , please contact our customer service staff by phone, fax or email.
|
