[PN# M-001-0096]
Monitor four sensors with any combination of a remote temperature, humidity or water sensing probes. If temperatures and humidity deviate from the preset limits or water forms a bridge between the contacts on the WaterBug® sensor the designated relay for each sensor will activate an alarm, dialer, transmitter, etc.
Features:
- Simultaneous operation of four sensors
- Defrost time delay up to 120 minutes
- Easy to read large LCD display
- Eight event alarm memory with time and date
- Auxiliary output relay for local audible alarm
- Auxiliary alarm silence feature with 10 minute timer
- Each sensor has offset calibration adjustment
- Temperature & humidity Hi / Lo set points
- Output relays can be configured to be initially energized or de-energized
- Tamper proof lock setting
- Snap fit mounting base with main housing for easy access
- Plug in terminal strip connectors for easier wire termination
- Sensor readings are displayed every few seconds
- Display F°, C°, % (Humidity) or Water Drop icon
- Sensor configuration retained in memory if power is lost
Specifications:
- Dimensions: 6.0” x 4.75 x 1.25
- Weight: .60 lb
- Lo & Hi Limit Adjust Range: -50 to 150° C
- Input Voltage: 12 VDC @ <200mA
- Number of sensor inputs: 4
- Unit Operating Range: 0° to 50° C
- Alarm Outputs: 4 - SPDT Relays (Configurable)
- Auxiliary Audible Alarm Output: 1 - SPDT Relays (Non-configurable)
- Case Material: ABS
|
 |
