|
|
WaterBug Alerts®
Electronic water detection at it's best! For over 25 years Winland Electronics has manufactured environmental security products, providing "peace-of-mind" solutions to protect against unfavorable water leakage in residential or commercial property. These WaterBug products provide reliable protection to effectively detect water and will send an alert signal to notify you of a problem. The WaterBug products can be integrated with any security system. Don't fall into the trap of only half protecting your property, specify Winland's security product solutions! Contact us today for assistance with your "peace-of-mind" solution! Call 1-800-635-4269 or e-mail to: sales@winland.com.
|
 |
Waterbug - 8 zone, 12or 24 VAC/VDC (WB-800)
[PN# M-001-0005]
The model WB-800 operates on 12 or 24 Volt AC/DC and has a form C relay output that can be connected to alarm panels, bells, dialers, etc. Unit also includes internal alarm buzzer with silence switch and eight LEDs on console to identify the sensor in alarm. As many as eight supervised sensor probes can be run up to 500 feet away (or 16 non-supervised sensors). Each sensor probe has two contacts. When a film of water forms a bridge between these contacts, the unit senses this and triggers the alarm output. The sensor will not alarm due to condensation or high humidity. Four standard surface sensors are included with the unit.
|
Waterbug - Battery Power w/OC output (WB-350)
[PN# 1047]
The model WB-350 operates on a 9V transistor battery (Not included) and has an open collector output that can be connected to alarm panels, bells, dialers, etc. Unit can monitor as many as six sensor probes, up to 100 feet away. Each sensor probe has two contacts. When a film of water forms a bridge between these contacts, the unit senses this and triggers the alarm output. The sensor will not alarm due to condensation or high humidity. One standard surface sensor is included with the unit.
|
Waterbug - 12 or 24 VAC or VDC (WB-200)
[PN# 1043]
The model WB-200 operates on 12 or 24 Volt AC/DC and has a form C relay output that can be connected to alarm panels, bells, dialers, etc. Unit can monitor as many as six sensor probes, up to 100 feet away. Each sensor probe has two contacts. When a film of water forms a bridge between these contacts, the unit senses this and triggers the alarm output. The sensor will not alarm due to condensation or high humidity. One standard surface sensor is included with the unit.
|
Waterbug - Integrated Sensor - Battery Power w/Buzzer (WB-100)
[PN# **DISCONTINUED**]
The model WB-100 is a stand-alone monitor that operates on a 9-volt transistor battery and has an audible alarm and low battery alarm. It is completely electronic with integrated sensor contacts. When a film of water forms a bridge between these contacts, the unit senses this and triggers the audible alarm output. Unit requires a customer supplied battery to operate.
|
|
