WaterBug

WaterBug® Alert

Industry Preferred Water Detection System

Choose the WaterBug for dependable water detection. Ideal for basement, sump pumps, drain storage areas, computer rooms, document storage areas, warehouses and sprinkler systems. WaterBug sensors work by forming a conductive bridge between two contacts.

Versatile 12 or 24 Volt AC/DC power for operation
No false alarms due to condensation or humidity
Can monitor up to 6 sensor probes - up to 100 feet away
Provides (1) form "C" contact closure output for alarm
Easy surface mount installation
One year parts and labor; subject to conditions of limited warranty

Products are sold through distributors world-wide. Please refer to the Distributor List to find a local distributor.

WB200

Use in conjunction with alarm panel, bell, wireless transmitter, etc. Run as many as 6 sensor probes up to 30.48 m away from unit for wide area protection. Console unit comes with 1 surface sensor (W-S-U) Up to 6 sensors may be connected to the console.

Model Number	WB200
Part Number	M-001-0104
Current Draw (Resting)	12, 24 VDC @ 35mA 12, 24 VAC @ 100 mA
Current Draw (Alarm)	12, 24 VDC @ <35mA 12, 24 VAC @ <100 mA
Sensitivity	Will not alarm due to high humidity or condensation.
Operating Temp for Console and Probe	+32 to 140°F (0 to+ 60°C)
Output	Form C (SPDT) 1 Amp @ 30 VDC, resistive 1 Amp @ 24 VAC, resistive
Buzzer	Connect to alarm panel for alarm notification. Unit does not have built in buzzer.
Recommended Max Distance (between console and probes)	1-2 probes; max 200’ (61 m) 3-6 probes; max 100’ (30.5 m) per probe
Max Probes per Console	6
Probe Dimensions (surface)	2 x 3 x .88” (5.1 x 7.6 x 2.2 cm)
Console Dimensions	5 x 2.44 x 1.25” (12.7 x 6.2 x 3.18 cm)
Dimensions	4.5 x 3.25 x 1” (11.4 x 8.3 x 2.5 cm)
Unit Weight	.35 oz (0.10 kg)
Mounting	Key slot
WB200 Specification Sheet	WB200 Product Manual

W-S-U

The WaterBug WB200 includes one standard unsupervised surface sensor (W-S-U) and accepts up to 6 sensors per console. Additional sensors may be purchased separately.

Model Number	W-S-U
Part Number	M-001-0106
Sensitivity	Will not alarm due to high humidity or condensation.
Operating Temp for Console and Probe	+32 to 140°F (0 to+ 60°C)
Recommended Max Distance (between console and probes)	1-2 probes; max 200’ (61 m) 3-6 probes; max 100’ (30.5 m) per probe
Max Probes per Console	6
Probe Dimensions (surface)	2 x 3 x .88” (5.1 x 7.6 x 2.2 cm)
Cable Length	15" (4.5 m) Cable may be extended using 22 AWG twisted pair wire.
W-S-U Specification Sheet

W-UC-U

The WaterBug WB200 includes one standard unsupervised surface sensor (W-S-U) and accepts up to 6 sensors per console. The probes attached to the console may be a mix of surface and Under Carpet for desired coverage.

Model Number	W-UC-U
Part Number	M-001-0107
Sensitivity	Will not alarm due to high humidity or condensation.
Operating Temp for Console and Probe	+32 to 140°F (0 to+ 60°C)
Recommended Max Distance (between console and probes)	1-2 probes; max 200’ (61 m) 3-6 probes; max 100’ (30.5 m) per probe
Max Probes per Console	6
Probe Dimensions (Under Carpet)	3.0 x 2.0 x .18” (76.2 x 50.8 x 4.57 mm)
Cable Length	15" (4.5 m) Cable may be extended using 22 AWG twisted pair wire.
W-UC-U Specification Sheet