Electronic Temp Alert (UTA-1)

[PN# **DISCONTINUED**]

Part #1201. Compact electronic Temp alert with professional appearance - Microprocessor controlled.


The model UTA-1 operates from 12V DC, features a professional appearance with large LCD display and separately adjustable high and low set points. Standard unit monitors temperature from +32 to +130 deg F (0 to 55 deg C). Optional probes are available for wider temperature ranges. If the monitored temperature exceeds the programmed set point, a SPST relay output is activated. The UTA-1 includes a 0-99 minute delay timer to prevent false alarms from brief variations in the temperature.

This model has been discontinued. Please use the EnviroAlert EA200 as a replacement.

• Residential or Vacation Homes
• Commercial Buildings
• Office and Computer Areas
• Unattended Buildings
• Greenhouses & Animal Buildings
• Freezers and Refrigerated Rooms
• Buildings with Controlled Climates

• Microprocessor-controlled design
• 12 VDC powered
• Single-zone, independently adjustable high and low set points
• Large LCD display read in ­F or ­C
• Provides (2) SPST output
• Supervise remote sensor probes up to 500 ft
• Easy surface mount installation
• One year parts and labor; subject to conditions of limited warranty.

• Standard Temp. probe (no cable. Not for freezers or coolers) P/N 1106
  Temp Range: +32 to +220 deg F (0 to +105 deg C).
• Sub-Zero Temp. probe P/N M-001-0014
  Temp Range: -120 to +32 deg F (-85 to 0 deg C).
• Low Temp. Sensor probe for coolers, etc. (15 ft. cable)
  P/N 1107
  Temp Range: -67 to +220 deg F (-55 to +105 deg C).
• High Temp. Sensor probe for hot & dry areas. (6 ft. cable)
  P/N 1108
  Temp Range: -67 to +300 deg F (-55 to +149 deg C).
• High/Low Liquid Temp. Sensor probe. (3 ft. cable) P/N 1109
  Temp Range: -67 to +300 deg F (-55 to +149 deg C).
• 1/2" NTP Thread Temp. probe. (3 ft. cable) P/N 1109A
  Temp Range: -67 to +300 deg F (-55 to +149 deg C).
• Audible Alarm Module (Model BZ-1) P/N 1175
  Voltage: 12VDC @ 8mA.
• Wall Transformer P/N 1111
  Voltage: 110 VAC - 12VDC regulated, 300mA.

• Control Unit Display Range (Maximum): -120­ to +300­ F (-85­ to +148­ C)
• Low or High Limit Adjust Range *: Sensor Dependent
• Recommended Sensor Cable: 18 - 24 AWG twisted Pair (shielded or unshielded)
• Minimum Span (Rec. dist. between high & low set points.): 4­ F (2.2­ C)
• Temp/RH Accuracy of Probes:+/-3­ F (+/-1.7­ C) For Probes #1106, 1107, 1108
  +/-0.5­ F (+/-0.28­ C) For Probes #1109, 1109A. M-001-0014
  +/- 5% RH for HA-III Humidity Sensor
• Temp/RH Response Time: Sensor Dependent
• Temp/RH Sensing Element: Linear Transducer
• Outputs (not for high voltage use): 2 SPST relays
• Contact Output Rating: 1 Amp @ 30 VDC ‚ 1 AMP @ 30 VAC 50-60 Hz (not for direct high voltage switching)
• Input Voltage Requirements: 12 VDC @ 75 mA
• Control Box Material: ABS
• Dimensions & Weight: 4.5" x 3.25" x 1" (11.4 cm x 8.3 cm x 2.5 cm) ‚
  8 oz. (227 g)
• Mounting: Surface Mount