For over 25 years Winland Electronics has manufactured environmental security products, providing "peace-of-mind" solutions to protect against unfavorable environmental conditions. The Temp & Humidity Alert products provide reliable protection to monitor high and low temperature/humidity limits for residential or commercial property. The Temp Alert and Humid-Alert products can be integrated with any security system. Don't fall into the trap of only half protecting your property, specify Winland's security product solutions today! Contact us today for assistance with your "peace-of-mind" solution!
1-800-635-4269 or e-mail to: securitysales@winland.com.
NOTE: The Environmental Security Products are not available for purchase online, however, they are available through our extensive distribution network. Please refer to the distributor listing for the nearest location.
|
 |
EnviroAlert (EA40012 & EA40024)
[PN# EA40012 & EA40024]
Monitor four zones with any combination of a remote temperature, humidity or water sensing probe. If temperatures and humidity deviate from the preset limits or water forms a bridge between the contacts on the WaterBug® sensor the designated relay for each zone will activate an alarm, dialer, transmitter, etc.
|
EnviroAlert (EA20012 & EA20024)
[PN# EA20012 & EA20024]
This advanced monitoring and alarm device provides precise monitoring of critical environments by utilizing an on-board temperature sensor or attaching any one of the remote temperature, humidity and water sensing probes. Receive dual zone coverage from simultaneous operation of the local and remote sensors. If either zone being monitored deviates from the preset limits, a relay output sends a signal to an appropriate warning system.
|
Mechanical Temp Alert (MTA-1)
[PN# 1200]
The professional looking MTA-1 requires no power for operation. Simply set the separately adjustable high and low set points within +32 to +100 deg F (0 to 38 deg C) range. If the monitored temperature rises above the high set point, a dry contact closure output is provided. If the monitored temperature falls below the low set point, a second dry contact closure output is provided.
|
Humid-Alert (HA-1)
[PN# 1190]
The HA-1 is a stand-alone humidity-monitoring device requiring no power for operation. Simply set the single high or low adjustable set point within 20% to 80% range. If the monitored humidity set point is met or exceeded, a SPDT micro-switch will activate.
|
Mechanical Fixed Temp Alert (TA-40)
[PN# 1100]
The simple low-cost TA-40 requires no power for operation. A mechanically fixed set point allows normally closed contacts to open when the monitored temperature falls below the 39 deg F (4 deg C) set point. This contact output is used to active external low current/voltage alarm
|
Mechanical Temp Alert (TA-2HL)
[PN# 1039]
The economical TA-2HL requires no power for operation. Simply set the separately adjustable high and low set points within -30 to +130 deg F (-34 to 54 deg C) range. If the monitored temperature rises above the high set point, a dry contact closure output is provided. If the monitored temperature falls below the low set point, a second dry contact closure output is provided.
|
Mechanical Temp Alert (TA-1)
[PN# 1014]
The economical TA-1 requires no power for operation. Simply set the separately adjustable high and low set points within -30 to +130 deg F (-34 to 54 deg C) range. If the monitored temperature rises above or falls below the set points, a dry contact closure output is provided.
|
Digital Temp Alert (DTA-1)
[PN# **DISCONTINUED**]
*** See NEW product EnviroAlert EA200 & EA400 ******** The DTA-1 operates from 12V DC or AC, features bright LED display and separately adjustable high and low set points. Standard unit monitors temperature from +32 to +130 deg F (0 to 55 deg C). Optional probes are available for wider temperature ranges. Alarm condition activates SPDT
|
Digital TempAlert 4-zone (DTA-4)
[PN# **DISCONTINUED**]
*** See NEW product EnviroAlert EA200 & EA400 ******** The microprocessor-controlled DTA-4 operates on 12 to 14 VDC power, monitoring both a high and a low temperature set point in up to 4 zones. Each zone has separately adjustable high and low set points and a SPDT relay output. Relay actives upon temperature rising above the high limit or falling below the low limit set point. Required probes are available separately for measuring temperatures from -67 to +300 deg F (-55 to +149 deg C).
|
Digital Temp & Humidity Alarm, 4-zone (DPM-4)
[PN# **DISCONTINUED**]
*** See NEW product EnviroAlert EA200 & EA400 ******** The microprocessor-controlled DPM-4 operates on 12 to 14 VDC power, monitoring both a high and a low temperature set point in 2 zones and monitoring both a high and a low humidity set point in 2 zones. Each zone has separately adjustable high and low set points and a SPDT relay output. Relay actives upon temperature or humidity rising above the high limit or falling below the low limit set point. Required probes are available separately for measuring temperatures from -67 to +300 deg F (-55 to +149 deg C) and humidity of 5% to 95% RH.
|
Electronic Temp Alert (UTA-1)
[PN# **DISCONTINUED**]
*** See NEW product EnviroAlert EA200 & EA400 ******** The UTA-1 operates from 12V DC, features a professional appearance with large LCD display and separately adjustable high and low set points. Standard unit monitors temperature from +32 to +130 deg F (0 to 55 deg C). Optional probes are available for wider temperature ranges. If the monitored temperature rises above the high set point, a SPST relay output is activated. If the monitored temperature falls below the low set point, a SPST relay output is activated. Unit includes a 0-99 minute delay timer.
|
Digital Temp-Alert w/Buzzer (TA-3HLD)
[PN# **DISCONTINUED**]
*** See NEW product EnviroAlert EA200 & EA400 ******** The full featured, microprocessor-controlled TA-2HLD operates from 12 or 24V DC/AC, highlights a professional appearance with large LCD display and separately adjustable high and low set points. Standard unit monitors temperature from +32 to +130 deg F (0 to 55 deg C). Optional probes are available for wider temperature ranges. If the monitored temperature rises above the high set point, a SPST relay output is activated. If the monitored temperature falls below the low set point, a SPST relay output is activated. Unit includes a 0-99 minute delay timer and audible alarm.
|
Digital Temp-Alert (TA-2HLD)
[PN# ** DISCONTINUED **]
*** See NEW product EnviroAlert EA200 & EA400 ******** The full featured, microprocessor-controlled TA-2HLD operates from 12 or 24V DC/AC, highlights a professional appearance with large LCD display and separately adjustable high and low set points. Standard unit monitors temperature from +32 to +130 deg F (0 to 55 deg C). Optional probes are available for wider temperature ranges. If the monitored temperature rises above the high set point, a SPST relay output is activated. If the monitored temperature falls below the low set point, a SPST relay output is activated. Unit includes a 0-99 minute delay timer.
|
