Mechanical Fixed Temp Alert (TA-40)

[PN# 1100]

Simple solution to avoid frost shattered pipes and the water damage that can follow.


The simple TA-40 Temp switch is the perfect solution for simple low cost protection in homes, mountain cabins, or any unattended building. The unit will activate a hardwire or wireless alarm system if the temperature should fall below 40 F from its fixed internal sensor. The TA-40 provides positive protection and peace-of-mind to residential and business property owners concerned about the risk of frost shattered pipes and the water damage that follows. An added advantage is the unit's compact size, which enables it to be installed in virtually any setting without being noticed. Contacts above 40 F are normally closed and below 40 F are normally open.


Important: Install a Temp Alert on every level of your home or business to adequately protect against freezing.

Do not use for freezer or cooler monitoring. Instead use a Digital Temp Alert unit with a remote sensor probe.

Typical Applications:

• Residential or Vacation Homes
• Commercial Buildings
• Office and Computer Areas
• Unattended Buildings
• Greenhouses & Animal Buildings
• Buildings with Controlled Climates

Features:

• Requires no power for operation
• Fixed 39 F low set point
• Compact size
• Provides (1) dry contact opening output for alarm
• Easy surface mount - two screw - installation
• One year parts and labor; subject to conditions of limited warranty.

Specifications:

• Operating Temperature Range: -40 to +212 F
  (-40 to +100 C)
• Contacts: Open at £ 39.5 +/-5.4 F (£ 4­ +/-3 C)
• Contact Output Rating: Voltage £ to 24V AC/DC ‚ Current £ 200mA (not for direct high voltage switching): Recommended Sensor Cable18 to 24 gauge
• Case Material: ABS plastic rated 94V-0: Dimensions: 2.5" x 0.8" x .55" (6.4 cm x 2 cm x 1.4 cm)
• Weight: 3.0 oz. (85 g)
• Color: Off-white
• Mounting: 2 screw holes (0.165" dia.)
• Master Pack Weight: Carton of 12: 1 pound (0.45kg)
• Warranty: 1 year Limited